修改tomcat安装目录配置多个不同端口的项目

1、将要同时启动的项目放入不同的webapps文件夹中

2、修改tomcat安装目录下的conf–>setting.xml文件

1. <?xml version=”1.0″ encoding=”UTF-8″?>
2. <!–
3. Licensed to the Apache Software Foundation (ASF) under one or more
4. contributor license agreements. See the NOTICE file distributed with
5. this work for additional information regarding copyright ownership.
6. The ASF licenses this file to You under the Apache License, Version 2.0
7. (the “License”); you may not use this file except in compliance with
8. the License. You may obtain a copy of the License at
10. http://www.apache.org/licenses/LICENSE-2.0
12. Unless required by applicable law or agreed to in writing, software
13. distributed under the License is distributed on an “AS IS” BASIS,
14. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
15. See the License for the specific language governing permissions and
16. limitations under the License.
17. –>
18. <!– Note: A “Server” is not itself a “Container”, so you may not
19. define subcomponents such as “Valves” at this level.
20. Documentation at /docs/config/server.html
21. –>
22. <Server port=”80″ shutdown=”SHUTDOWN”>
23. <Listener className=”org.apache.catalina.startup.VersionLoggerListener” />
24. <!– Security listener. Documentation at /docs/config/listeners.html
25. <Listener className=”org.apache.catalina.security.SecurityListener” />
26. –>
27. <!–APR library loader. Documentation at /docs/apr.html –>
28. <Listener className=”org.apache.catalina.core.AprLifecycleListener” SSLEngine=”on” />
29. <!– Prevent memory leaks due to use of particular java/javax APIs–>
30. <Listener className=”org.apache.catalina.core.JreMemoryLeakPreventionListener” />
31. <Listener className=”org.apache.catalina.mbeans.GlobalResourcesLifecycleListener” />
32. <Listener className=”org.apache.catalina.core.ThreadLocalLeakPreventionListener” />
34. <!– Global JNDI resources
35. Documentation at /docs/jndi-resources-howto.html
36. –>
37. <GlobalNamingResources>
38. <!– Editable user database that can also be used by
39. UserDatabaseRealm to authenticate users
40. –>
41. <Resource name=”UserDatabase” auth=”Container”
42. type=”org.apache.catalina.UserDatabase”
43. description=”User database that can be updated and saved”
44. factory=”org.apache.catalina.users.MemoryUserDatabaseFactory”
45. pathname=”conf/tomcat-users.xml” />
46. </GlobalNamingResources>
48. <!– A “Service” is a collection of one or more “Connectors” that share
49. a single “Container” Note: A “Service” is not itself a “Container”,
50. so you may not define subcomponents such as “Valves” at this level.
51. Documentation at /docs/config/service.html
52. –>
53. <!–
54. 第一个项目，webapps，默认端口为8080
55. –>
56. <Service name=”Catalina”>
57. <!–The connectors can use a shared executor, you can define one or more named thread pools–>
58. <!–
59. <Executor name=”tomcatThreadPool” namePrefix=”catalina-exec-“
60. maxThreads=”150″ minSpareThreads=”4″/>
61. –>
64. <!– A “Connector” represents an endpoint by which requests are received
65. and responses are returned. Documentation at :
66. Java HTTP Connector: /docs/config/http.html
67. Java AJP Connector: /docs/config/ajp.html
68. APR (HTTP/AJP) Connector: /docs/apr.html
69. Define a non-SSL/TLS HTTP/1.1 Connector on port 8080
70. –>
71. <Connector port=”8080″ protocol=”HTTP/1.1″
72. connectionTimeout=”20000″
73. redirectPort=”8443″ />
74. <!– A “Connector” using the shared thread pool–>
75. <!–
76. <Connector executor=”tomcatThreadPool”
77. port=”8080″ protocol=”HTTP/1.1″
78. connectionTimeout=”20000″
79. redirectPort=”8443″ />
80. –>
81. <!– Define a SSL/TLS HTTP/1.1 Connector on port 8443
82. This connector uses the NIO implementation. The default
83. SSLImplementation will depend on the presence of the APR/native
84. library and the useOpenSSL attribute of the
85. AprLifecycleListener.
86. Either JSSE or OpenSSL style configuration may be used regardless of
87. the SSLImplementation selected. JSSE style configuration is used below.
88. –>
89. <!–
90. <Connector port=”8443″ protocol=”org.apache.coyote.http11.Http11NioProtocol”
91. maxThreads=”150″ SSLEnabled=”true”>
92. <SSLHostConfig>
93. <Certificate certificateKeystoreFile=”conf/localhost-rsa.jks”
94. type=”RSA” />
95. </SSLHostConfig>
96. </Connector>
97. –>
98. <!– Define a SSL/TLS HTTP/1.1 Connector on port 8443 with HTTP/2
99. This connector uses the APR/native implementation which always uses
100. OpenSSL for TLS.
101. Either JSSE or OpenSSL style configuration may be used. OpenSSL style
102. configuration is used below.
103. –>
104. <!–
105. <Connector port=”8443″ protocol=”org.apache.coyote.http11.Http11AprProtocol”
106. maxThreads=”150″ SSLEnabled=”true” >
107. <UpgradeProtocol className=”org.apache.coyote.http2.Http2Protocol” />
108. <SSLHostConfig>
109. <Certificate certificateKeyFile=”conf/localhost-rsa-key.pem”
110. certificateFile=”conf/localhost-rsa-cert.pem”
111. certificateChainFile=”conf/localhost-rsa-chain.pem”
112. type=”RSA” />
113. </SSLHostConfig>
114. </Connector>
115. –>
117. <!– Define an AJP 1.3 Connector on port 8009 –>
118. <Connector port=”8011″ protocol=”AJP/1.3″ redirectPort=”8443″ />
121. <!– An Engine represents the entry point (within Catalina) that processes
122. every request. The Engine implementation for Tomcat stand alone
123. analyzes the HTTP headers included with the request, and passes them
124. on to the appropriate Host (virtual host).
125. Documentation at /docs/config/engine.html –>
127. <!– You should set jvmRoute to support load-balancing via AJP ie :
128. <Engine name=”Catalina” defaultHost=”localhost” jvmRoute=”jvm1″>
129. –>
130. <Engine name=”Catalina” defaultHost=”localhost”>
132. <!–For clustering, please take a look at documentation at:
133. /docs/cluster-howto.html (simple how to)
134. /docs/config/cluster.html (reference documentation) –>
135. <!–
136. <Cluster className=”org.apache.catalina.ha.tcp.SimpleTcpCluster”/>
137. –>
139. <!– Use the LockOutRealm to prevent attempts to guess user passwords
140. via a brute-force attack –>
141. <Realm className=”org.apache.catalina.realm.LockOutRealm”>
142. <!– This Realm uses the UserDatabase configured in the global JNDI
143. resources under the key “UserDatabase”. Any edits
144. that are performed against this UserDatabase are immediately
145. available for use by the Realm. –>
146. <Realm className=”org.apache.catalina.realm.UserDatabaseRealm”
147. resourceName=”UserDatabase”/>
148. </Realm>
150. <Host name=”localhost” appBase=”webapps”
151. unpackWARs=”true” autoDeploy=”true”>
153. <!– SingleSignOn valve, share authentication between web applications
154. Documentation at: /docs/config/valve.html –>
155. <!–
156. <Valve className=”org.apache.catalina.authenticator.SingleSignOn” />
157. –>
159. <!– Access log processes all example.
160. Documentation at: /docs/config/valve.html
161. Note: The pattern used is equivalent to using pattern=”common” –>
162. <Valve className=”org.apache.catalina.valves.AccessLogValve” directory=”logs”
163. prefix=”localhost_access_log” suffix=”.txt”
164. pattern=”%h %l %u %t &quot;%r&quot; %s %b” />
166. </Host>
167. </Engine>
168. </Service>
170. <!– 第二个项目，webapps1，端口号8081
171. 再修改redirectPort：8444、
172. appBase=”webapps1″
173. –>
174. <Service name=”Catalina”>
175. <Connector port=”8081″ protocol=”HTTP/1.1″
176. connectionTimeout=”20000″
177. redirectPort=”8444″ />
178. <Engine name=”Catalina” defaultHost=”localhost”>
179. <Realm className=”org.apache.catalina.realm.LockOutRealm”>
180. <Realm className=”org.apache.catalina.realm.UserDatabaseRealm”
181. resourceName=”UserDatabase”/>
182. </Realm>
183. <Host name=”localhost” appBase=”webapps1″ unpackWARs=”true” autoDeploy=”true”>
184. <Valve className=”org.apache.catalina.valves.AccessLogValve” directory=”logs”
185. prefix=”localhost_access_log.” suffix=”.txt”
186. pattern=”%h %l %u %t &quot;%r&quot; %s %b” />
187. </Host>
188. </Engine>
189. </Service>
191. <!– 第三个项目，webapps2，端口号8082
192. 再修改redirectPort：8445、
193. appBase=”webapps2″
194. –>
195. <Service name=”Catalina”>
196. <Connector port=”8082″ protocol=”HTTP/1.1″
197. connectionTimeout=”20000″
198. redirectPort=”8445″ />
199. <Engine name=”Catalina” defaultHost=”localhost”>
200. <Realm className=”org.apache.catalina.realm.LockOutRealm”>
201. <Realm className=”org.apache.catalina.realm.UserDatabaseRealm”
202. resourceName=”UserDatabase”/>
203. </Realm>
204. <Host name=”localhost” appBase=”webapps2″ unpackWARs=”true” autoDeploy=”true”>
205. <Valve className=”org.apache.catalina.valves.AccessLogValve” directory=”logs”
206. prefix=”localhost_access_log.” suffix=”.txt”
207. pattern=”%h %l %u %t &quot;%r&quot; %s %b” />
208. </Host>
209. </Engine>
210. </Service>
212. </Server>

转载请注明：XAMPP中文组官网 » 修改tomcat安装目录配置多个不同端口的项目